Universal Expansion Joints



What Is The Universal Expansion Joint?
Expansion joints are simply an assembly of bellows with other components to form a product that can contain movements caused by stress, thermal stress, and other seismic activities. They can be classified into multiple types based on their design, functions, and so on. Some of the common types are axial, lateral, hinged, gimbal, universal, elbow pressure balanced expansion joints and so on. Universal expansion joints are one of the most important and most used types of expansion joints.







The reason behind the widespread usage of universal expansion joints is that unlike a lot of the other types, these can contain movements in all 3 directions namely lateral, axial, and angular. Also known as a double bellow expansion joints, these are made with 2 bellows that are connected by a spool or pipe section. Another major advantage of using this over others is that large amounts of lateral deflection can be absorbed with this. If the capacity has to be increased, this can be done by increasing the length of the pipe section connecting the 2 bellows. In certain cases, tier rods may be attached to limit the axial expansion. If 2 tie rods are used, it can take in good lateral and angular expansion. By using more than 2, you can make the expansion joints to contain only lateral expansion.
Features
Vibration and oscillation absorption
Low maintenance cost
Compact and light
Abrasion-resistant
Corrosion-resistant
Eliminated pressure thrusts
Installation
Since the universal expansion joints are made from thin material, it is extremely necessary to ensure that they are not damaged during the installation. Also, for correct functioning and fitting, it is important to follow correct procedures during the process.

Installation process
Be careful while handling the product. It is important to ensure that there are no dents, weld splatter, etc on them.
The joint is not made to rectify misalignments in the piping system. As a result, you must not use them to do the same. Imposing unnecessary movements to align can reduce the life cycle and capability.
If any sleeves, flanges, etc. are required, you must attach them properly.
                   
  Do's and Don'ts before the test

Store in a cool dry place and not exposed to heavy traffic and a damaging environment.
While lifting, do not use ropes or rods through the holes. Use proper lugs instead.
Install the product in the direction of flow.
Do not subject it to heaving torsional forces.
Do not use steel wire, mesh, and other abrasive cleaning products on the surface.
Before testing, ensure that you remove all the shipping devices and packaging.
Align the bolt holes with ones matching on the mounting flange.
Do not use cleaning products that contain Chlorides
Do not expose the product to more than one and a half times its rated working pressure.


Inspection During and After Test
Check for any evidence of leakage or loss of pressure.
Check for any distortion of the expansion joint hardware, the bellows and other piping components.
Check for any possible squirm in the product.
If there are any abnormalities during the testing, it must be evaluated by the concerned authority.






                                             

                                                      Universal Expansion Joints

Comments

Post a Comment

Popular posts from this blog

Stainless Steel Expansion Joints - SS Bellows

Image
Metallic bellows are made from a simple metal tube by creating convolutions on its side. As per the thickness required, plies are added to it. By creating this design, the device expands or compresses according to the temperature changes in the piping lines. This, therefore, accommodates the thermal movements, vibrations, and other mechanical deformations caused by the high temperature and pressure gases. The metals may be of various types of alloys. Stainless steel bellows are made by using stainless steel to create the bellow section. Kwality Products are a top SS bellows manufacturer who uses high-grade stainless steel such as SS304L, SS316L, SS321, etc to manufacture bellows such as stainless steel vacuum bellows, stainless steel exhaust bellows, etc, as well as are known for producing other types of bellows according to the EJMA standards. What is SS Bellows? SS bellows or SS expansion joints are simply put, metal bellows that use a type of stainless steel instead o...
Read more

Metal Bellows Manufacturers - Metallic Bellows

Image
Bellows in layman terms are simply devices that have concertinaed sides and have the ability to expand or compress as per the necessity. Normally, bellows are used in industries where there is a need to transfer high temperature and pressure fluids that can cause deformations and stress of varying capacities. Bellows can be made from metal, rubber, or even Teflon depending on the requirements. What are Metal Bellows? Metallic bellows are bellows that are made from metals such as stainless steel, or any other metal alloys. Used in metal expansion joints for the safe and convenient functioning of pipelines and ducts, these are extremely tolerant to heat and pressure, and also have excellent corrosion resistance. The metal bellows are manufactured by first forming cylinder from thin sheets, and then creating circumferential convolutions on the surface. These help in providing a compressive and expansive effect on the device thereby helping to withstand extreme conditions. T...
Read more

SS Bellows

Image
                      SS- Stainless Steel How To Make Stainless Steel Bellows? The process of manufacturing SS Bellows  is simple, however, it is extremely necessary to do the process by keeping in mind the several standards and regulations such as the ASME, EJMA, and ISO standards. A good stainless steel bellow manufacturer conforms to these to produce the best quality products. Bellow Designs The first problem SS bellow manufacturer solves is to determine the design parameters. The diameter for the SS expansion joint is determined based on the client's requirement. Depending on the expected life cycle, the thickness of the SS bellows is decided. Based on the thickness, the number of plies required is set. If there is a need to absorb a good amount of vibration in the system, or if there is a requirement for very long life cycles, multiple plies are used. If there are only minimal movements or if infrequent temperatur...
Read more